What is the name for repair or maintenance work on a stone foundation?
Methods Of Stone Foundation Repair (Also Called “Repointing”) Properly built stone foundations can be some of the most structurally sound foundations around. The stone may leak water in a process called “weeping,” so it’s good to monitor mortar joints, voids, or cracks.
Are stone foundations better than concrete?
Concrete is highly prone to cracks and tends to require more maintenance. Stone is going to cost more from the get-go but will provide a standout look you won’t find elsewhere. If you go with the most durable (and expensive) types of stone it will likely look great for a very long time.
What is repointing stone?
Repointing is the process of renewing the pointing, which is the external part of mortar joints, in masonry construction. Over time, weathering and decay cause voids in the joints between masonry units, usually in bricks, allowing the undesirable entrance of water.
How do you fix a hole in a stone wall?
A more permanent remedy is to remove a damaged stone and shape another to fit the cavity—a repair that, while time-intensive, can be readily tackled by a handy homeowner. When it comes to work on stone buildings, there’s a lot to be said for doing the job yourself.
How do you repair stone in historic buildings?
2. Find a Match. An important step in any stone repair job is selecting an appropriate match. Stone in historic buildings typically came from a local or regional quarry, so start by contacting masonry supply dealers in your area.
Should I repair or replace damaged stone?
If the individual stone is large but the damaged part is relatively small, you can remove only the deteriorated portion and ﬁt a new piece into the old with the smallest joint possible. After you’ve made repairs to all severely spalled or crumbling stone surfaces, it then becomes a matter of judgment as to how to handle other minor imperfections.
How do I choose the best stone repair jobs?
An important step in any stone repair job is selecting an appropriate match. Stone in historic buildings typically came from a local or regional quarry, so start by contacting masonry supply dealers in your area.