What is the difference between Motul C2 and C4?


What is the difference between Motul C2 and C4?

C2 is for road use. C3 is for off-roading. C4 for racing motorsport.

Which lubricant is best for chains?

Best bike chain lubes

  • Smoove Lube. The Energizer Bunny of chain lube.
  • Rock N Roll Gold. Workhorse all-rounder chain lube.
  • Silca Super Secret Chain Lube. It’s like hot wax but in an easy to apply drip bottle.
  • Green Oil Wet Lube.
  • Finish Line Wet.
  • CeramicSpeed UFO Drip Ceramic lube.
  • Tru Tension All Weather.
  • Molten Speedwax.

What is Motul Chain Lube?

A result of Motul’s experience in motorcycle racing, only for road use (very sticky product), MOTUL CHAIN LUBE FACTORY LINE is a lubricant specifically developed to lubricate racing motorcycle chains: Road Racing and Endurance.

How long does Motul Chain Lube take to dry?

about 10 minutes
Looks wet, dries slightly white in about 10 minutes. Spin your rear wheel freely by hand for a minute or two, and your chain is nicely coated. It doesn’t fling off after drying and doesn’t attract dirt and grime like other lubricants.

What is C1 chain lube?

Motul C1 Chain Clean Improves the life span of your motorcycle chain. Cleans all types of motorcycle (road and off road), quad and kart chains. Removes all encrusted deposits: sand, dirt, oil, grease. Application of chain clean to be followed by C2 chain lube road for best results. Chlorine-free formula.

How often should you dry chain lube?

Dry chain lube typically has a lifespan of up to 100 miles. Wax chain lube should be reapplied every 50 to 100 miles. Wet chain lube can last well over 100 miles, and Finish Line’s Ceramic Wet Chain Lube can reportedly last even longer with a limit of 175 miles.

How long does Motul chain lube last?

Easily last 500km if you apply it after a good cleaning and give time to penetrate lube.

Can I ride my bike after lubing chain?

Mine gets wet once a week, when I clean it. As for the chain wax, warm the chain up with a 10-15 min ride, spray the lube on and let it set for 5-10. Wipe off the excess on the outside of the chain and go ride. When I give the chain a good cleaning, I use WD-40 and a wire brush.

Can you ride your bike right after lubing the chain?

However, the practice is the same with any lube – wipe off the excess before you ride. Smith agrees with such practice, stating that it’s better to lube over a dirty chain than not lube at all. “At a minimum, a rider should re-lube the chain prior to every ride, even if they are re-lubing over a dirty chain.

What is C2 in chain lube?

The C2 chain lube is also of very high quality. It provides a firm layer of lube on the chain. It is also fairly water resistant, long lasting (about 400-500km) and is also fairly dirt-resistant.

Which oil is best for motorcycle chain?

  1. ProHonda Chain Lube & Cleaner.
  2. Maxima Chain Wax.
  3. Bel-Ray Super Clean Chain Lube.
  4. Motorex Road Chain Lube.
  5. Motul C2 Chain Lube Road.
  6. DuPont Teflon Chain-Saver Dry Self-Cleaning Lubricant.
  7. PJ1 Blue Label Chain Lube.

Does chain lube expire?

Bicycle chain lubricants don’t have expiration dates. Lubricants, in general, have a manufacturer recommended storage-life of 1-10 years. In reality, if the lubricant is stored in a sealed container and is not exposed to extreme heat, the storage-life is well over 100 years for any type of lubricant.

Do I have to clean chain before lube?

Don’t have time for a full clean? Just backpedal your chain through a clean, lint-free rag. This is good to do anytime, especially before you re-apply lube. In this quickest of methods, simply wrap the chain with a clean, lint-free cloth, and then backpedal the drivetrain through it to wipe off the exterior muck.

How often should bike chain be lubed?

If you are a regular bike commuter you should lube your bike chain at least every month or every 150-200 miles (240-320 kms). Depending on the conditions you ride your bike in and the type of chain lube you use, this period can vary from a few days to a month.

How long should lube sit on chain?

30 minutes
Plan for 30 minutes; this includes letting your chain dry in between rinsing off the degreaser and applying the lube.