What is the diameter of a category 1 hitch?
Three-point hitch specifications
| Category | Hitch pin size | |
|---|---|---|
| 1 | 19 mm (3/4″) | 22.4 mm (7/8″) |
| 2 | 25.5 mm (1″) | 28.7 mm (1 1/8″) |
| 3 | 31.75 mm (1 1/4″) | 37.4 mm (1 7/16″) |
| 4 | 45mm (1 3/4″) | 51 mm (2″) |
What is the difference between a Category 1 and 2 quick hitch?
Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable. Make sure you take a test drive with every tractor you’re considering.
What are the dimensions of a Category 2 quick hitch?
The overall dimensions measure, 37-1/4 inches width x 19-1/2 inches height x 4 inches front to back. The hooks measure 32-1/4 inches from center to center. 2 Lift pins: 1-1/8 in.
What is a quick hitch for Cat 1?
QH15 Series Quick-Hitches Land Pride’s 3-Point Quick-Hitch is available for a Cat. 1 hitch allowing you to easily hook on to implements, some without ever leaving the tractor seat.
What diameter are CAT 2 pins?
16mm – 5/8″ Diameter pin both top and bottom.
How wide is a Category 3 quick hitch?
| Category 2 | Category 3 | |
|---|---|---|
| Lower link hole diameter | 28.70 mm (1.13 in.) | 37.34 mm (1.47 in.) |
| Lower hitch point Span (1) | 825 mm (32.48 in.) | 964.95 mm (37.99 in.) |
| Width of ball (2) | 44.96 mm (1.77 in.) | 44.96 mm (1.77 in.) |
| Pin centerline – Lower to upper (3) | 610.11 mm (24.02 in.) | 685.04 mm (26.97 in.) |
What does Category 2 mean on a tractor?
Once you cross over 50 horsepower and you move up into utility tractors, you’re gonna move into Category 2. This is typically used on tractors between about 50 and 150 horsepower or so, although there are always gonna be some exceptions in those ranges.
What is a Category 1 tractor hitch?
Category 1 You’ll widely find these on tractors offering between 20 and 50 horsepower. The top link pin measures 3/4 inch in diameter, while the two lift arm pins are slightly thicker at 7/8 inch. The spacing between the lift arms is approximately 26 inches. You may also find references to “limited” Category 1 hitches.
What is a limited category 1 hitch?
Limited Category 1 3-Point Hitch You may notice some sub-compact tractors, such as the John Deere 1 Series, have a “limited” category 1 hitch. This indicates that the hitch is lower to the ground and may not lift as high or open as wide as standard full-size category 1 hitches.
What size is a cat 1 top link?
Category 1 Usually found on tractors from 16 – 45HP
- 19mm – 3/4″ Top Link,
- 22mm – 7/8″ Lower linkage.
What is a limited cat 1 hitch?
What is iMatch for John Deere?
The iMatch Quick Hitch from John Deere was designed to make it quick and easy. The iMatch Quick Hitch is designed to meet the ASAE Category 1 Standard S278. 6 for quick-attach hitches, which guarantees it will fit any category 1 implement.
What size is a Cat 1 pin?
What are the 3-point hitch categories?
| Category | Tractor Power | Top link pin diameter |
|---|---|---|
| 1 | 20-45 HP | 3⁄4 in (19 mm) |
| 2 | 40-100 HP | 1 in (25 mm) |
| 3 | 80-225 HP | 1 1⁄4 in (32 mm) |
| 4 | More than 180 HP | 1 3⁄4 in (44 mm) |