What has a viscosity of 100 cP?
Viscosity Comparison Chart
| MATERIAL | VISCOSITY (centipoises) |
|---|---|
| Water @ 70° F | 1-5 |
| Blood or Kerosene | 10 |
| Anti-Freeze or Ethylene Glycol | 15 |
| Motor Oil SAE 10 or Corn Syrup | 50-100 |
Is centipoise a unit of viscosity?
A unit of measurement for viscosity equivalent to one-hundredth of a poise and symbolized by cP. Viscosity is the ratio of shear stress to shear rate, giving the traditional unit of dyn-s/cm2 for Poise. In metric (SI) units, one cP is one millipascal-second (mPa.
What is the viscosity of Coca Cola?
3. Results
| Drink | pH | Viscosity (mPas) |
|---|---|---|
| Sprite | 2.81 | 1.32 |
| Fanta orange | 3.03 | 1.55 |
| Coca Cola | 2.47 | 1.49 |
| Coca Cola light lemon | 2.73 | 0.99 |
What is centipoise a measure of?
The value (in centipoise) is a measure of the ability of a liquid to flow through a pipe or a hole; From: Condensed Encyclopedia of Polymer Engineering Terms, 2001.
How do you calculate centipoise?
Centipoise (cP) = Specific Gravity × Centistokes (cSt).
What is the scale for viscosity?
Viscosity Scale
| Water @ 70°F / 21°C | 1 | centipoise (cps) |
|---|---|---|
| Maple Syrup or Motor Oil (SAE 30) | 150 – 200 | centipoise (cps) |
| Castor Oil or Motor Oil (SAE 40) | 250 – 500 | centipoise (cps) |
| Glycerin or Motor Oil (SAE 60) | 1,000 – 2,000 | centipoise (cps) |
| Pourable Urethane Rubbers | 1,000 – 3,000 | centipoise (cps) |
What is the viscosity of ketchup?
The estimated ketchup viscosity at 0.13 s−1 is ≈80 Pa s from Bostwick measurements and 166 Pa s from the Flow-viz for the pumping rate of 5.3 l/min, calculated from the Herschel-Buckley fit.
How do you rank viscosity?
The higher the viscosity, the slower the liquid flows through the tube and the steel balls fall. Viscosity is expressed in units of the poise (mPa•s); the higher the number, the higher the viscosity.
Is cP the same as cps in viscosity?
A unit of measure of dynamic viscosity in the centimeter-gram-second system of units equal to one one-hundredth of a poise (1 P = 100 cP = 1 g x cm-1 x s-1). (The viscosity of water at 70 F is 1 centipoise. The lower the number, the less viscous the material.)
What does a CP of 1 mean?
A Cp of one indicates that the width of the process and the width of the specification are the same. A Cp of less than one indicates that the process spread is greater than the specification. This means that some of the data lies outside the specification.
How do you read viscosity index?
The number before the W represents the oil viscosity at lower temperatures, while the second number (after the W) indicates the viscosity at operating temperatures. For example, this means that 5W30 engine oil has less viscosity at lower and higher temperatures when compared to 10W40.