How do you sew blackout lined curtains?

28/10/2022

How do you sew blackout lined curtains?

  1. Step 1: Cut and Lay Out Fabric. pinning fabric for blackout shade.
  2. Step 2: Sew Sides. sewing blackout fabric to curtain panel.
  3. Step 3: Iron Seams. ironing edges of blackout curtain.
  4. Step 4: Make Rod Casing. measuring and marking fabric.
  5. Step 5: Hem and Finish. finished blackout curtains with chair.

Can you sew blackout fabric?

Stitch together widths of blackout fabric to create the width required for your window. Sew a neat 5/8 inch seam with a straight stitch on your sewing machine. Press to one side with a dry iron on a medium heat setting. Topstitch the seam allowances on one side.

Do you hem blackout lining?

With Blackout fabric linings the hems should be as short as possible 1-2cm on all four sides, this will enable the curtains and the blackout lining to work much better at blocking out the light.

What needle do you use for blackout curtains?

Use a maximum of 5 to 6 stitches per inch. Use a Mercerized COTTON or a Texturized Polyester thread when sewing blackout lining. These threads tend to plug up needle-holes. Use a Teflon Needle – Teflon needles will not heat up as much as others.

What side of blackout lining faces the window?

While some blackout liners are sewn directly onto the curtain, other liners are a separate structure, one side looking like vinyl, the other like fabric. The fabric side faces the window to help protect the coated side, although the blackout feature works regardless of the lining’s direction.

What kind of thread do you use for curtains?

If you are using our TuffSew Straight Stitch, we recommend you use nylon bonded 69 thread. #4 Always wash, dry, and iron your fabric – you don’t want any dreaded wrinkles showing up after you hang your new curtains. #5 For heavy duty lined curtains, add two extra inches to the width of your curtain fabric.

Does blackout lining need to be hemmed?

What can you do if your curtains are too long?

There are two ways you can do this. The easiest way is to hang the curtains, then fold the bottoms under so they just graze the floor. However, you can also measure the length from the top of the curtain rod to the floor, then measure down from the top of the curtains.

How do you attach blackout lining to curtains without sewing?

How To Add Blackout Lining To Existing Curtains

  1. Remove the curtains from the pole and lay face down on a flat surface.
  2. Insert the curtain hooks into the header tape pockets of the lining.
  3. Hang the curtains, and adjust the placement of the curtain hooks on header tape for improved positioning and drape.

What is the difference between blackout and room darkening curtains?

Blackout shades use a fabric that blocks 100% of all incoming light, while “room darkening” usually refers to almost any shade that uses a fabric that blocks between 95% and 99% of the light that enters your room. Anything that blocks less than 95% of the light is usually referred to as light filtering.

Do you need to hem blackout lining?