How do you clean a flush draft system?


How do you clean a flush draft system?

How to Clean the Lines

  1. Run a cleaning solution through the draft line under pressure until the flow runs clear.
  2. Wait while the solution soaks in the lines.
  3. Run clean water through the draft line under pressure to flush out the cleaner.
  4. Tap the next keg.
  5. Open the faucet and let it run until beer comes out.

How often should draft beer lines be cleaned?

every two weeks
At a minimum, you should clean your draught line every two weeks with an alkaline detergent cleaner to remove protein and films that build up quickly.

How long can you leave beer line cleaner in the lines?

If the manufacturer has stated not to leave the beer line cleaner in the dispense lines longer than 45 minutes then don’t leave it longer or overnight, this will lead to your beer lines sustaining damage to the pipe linings which will cause tainting and dispense issues such as flat beer.

Can you get sick from dirty beer lines?

Can You Get Sick From Dirty Beer Lines? You are not drunker than before. Clean draught lines do not make you sick, but dirty draught lines do cause you to feel ill. “Draft lines can become contaminated with bacteria over time, causing you to get sick and resulting in a bad taste.”.

What is a clean draft?

A draft to which no documentation has been attached.

What chemical is used to clean beer lines?

Basic Caustic / Chlorinated beer line cleaners are a mixture of either Sodium Hydroxide or Potassium Hydroxide (This is the Caustic Part) and Sodium Hypochlorite. More effective and complex beer line cleaners will also contain water softening and scale removing additives.

Can you use baking soda to clean beer lines?

We highly recommend always using a specific beer-line cleaning solution, rather than vinegar, baking soda or any bleach-containing substances for the cleanest and safest results.

Do you turn gas off to clean beer lines?

For best cleaning results switch off any of the beer coolers. Make sure that each gas line that is usually switched on and running in to the keg is turned off (switches that are running the gas pump (black boxes) can be left on).

Why does beer line cleaner go green?

If the chemical has changed from purple to blue, green or yellow, then it has picked up organic contamination in the system. Replace it with a fresh solution and repeat the process.

How do I know if my beer lines are clean?

Simply ask to see a bar’s line cleaning log. A dirty beer line will have sugar and protein residue built up inside. These residues may break off when agitated by the flow of beer, resulting in chunks or flakes in the dispensed beer.

What happens if beer lines aren’t cleaned?

Beer stone will build up and eventually flake off on the inside of the beer tubing if the system is not properly maintained. High amounts of beer stone may also have a negative effect on taste. These flakes are often grey or brown in color.

How often should I clean Kegerator lines?

How Often Should Beer Lines Be Cleaned? It is recommended that you clean your draft lines with caustic beer line cleaning solution a minimum every two weeks or, at least, every time you change kegs.

What is in beer line cleaning solution?