How do I reset my Brother tn 630 toner?

1. Open front door.
2. Turn off printer.
3. While holding down the GO button, turn printer back on.
4. When all four LEDs light up release GO button. All LEDs will turn off.
5. Press the GO button 2 times.
6. Press the GO button 5 times.
7. Paper light will be blinking.
8. At this point the toner end-of-life condition has been reset.

How do I reset my brother DR 630 drum?

How to Reset DR630 Drum for all other Brother HL Printers

1. Open the front compartment door.
2. Press and hold the “OK” button for about 2 seconds.
3. When “Drum Unit” appears on the display, press “OK”
4. Press the arrow button until the display reads “Reset”
5. Reset the counter to zero.
6. Close the front compartment door.

How do I reset my brother counter drum?

Reset the Drum Counter

1. Close the front cover.
2. Make sure the machine is turned on.
3. Press. (Settings).
4. Press All Settings. (This step might be skipped in some models.)
5. Choose Machine Info. or Machine Information => Parts Life.
6. Press and hold Drum or Drum Life until the machine’s display message changes.
7. Press Yes.
8. Press.

How do you change the drum on a DR 630?

How to replace a DR-630 drum unit

1. Turn on the printer and open the front cover.
2. Remove the toner cartridge and drum unit from the printer.
3. Release the toner cartridge from the drum assembly by pushing down on the green lock lever on the left side of the unit.
4. Unbox the new drum unit.

Why is my Brother printer saying no toner when there is?

The No Toner message appears if the toner cartridge or the toner cartridge and drum unit assembly is not installed correctly. Remove the toner cartridge and drum unit assembly. Remove the toner cartridge from the drum unit, and reinstall the toner cartridge back in the drum unit.