How many horsepower is a Honda GX200 engine?
Smooth performance, lightweight and quiet. The Honda GX200T2 engine produces 5.6 HP (4.1 kW) at 3,600 rpm of maximum horsepower and 5.0 HP (3.7 kW) at 3,600 rpm of continuous rated power. The maximum torque is 12.4 N. m (1.3 kg).
How much oil does a Honda GX200 take?
0.6l
Specifications
| Engine Type | Air-cooled 4-stroke OHV |
|---|---|
| Air cleaner | Dual element |
| Oil Capacity | 0.63 US qt (0.6l) |
| Fuel Tank Capacity | 3.3 U.S. qts (3.1 liters) |
| Fuel | Unleaded 86 octane or higher |
What kind of oil does a Honda GX200 take?
10W/30 API SG
SPECIFICATIONS
| MODEL | GX200 |
|---|---|
| RECOMMENDED OIL | 10W/30 API SG |
| OIL CAPACITY | 0.6l |
| FUEL TANK CAPACITY | 3.1l |
| DIMENSIONS | 313 x 376 x 346mm |
What type of oil does a Honda GX200 take?
What is the difference between Honda GX and GC engines?
Honda has six small engine models, but only two are common on pressure washers: GC and GX. The GC series is designed for residential use, while the GX series is designed for commercial use.
Does a Honda GX200 have an oil filter?
Agricultural Equipment, Water Pumps, and even Go Karts, are powered by the Honda GX200 engine….SPECIFICATIONS.
| MODEL | GX200 |
|---|---|
| RECOMMENDED OIL | 10W/30 API SG |
| OIL CAPACITY | 0.6l |
| FUEL TANK CAPACITY | 3.1l |
| DIMENSIONS | 313 x 376 x 346mm |
How much oil does a Honda 6.5 hold?
This 6.5-horsepower engine holds 0.58 quarts of oil (18.6 ounces) and does not have an oil filter. For normal operating conditions, the manufacturer recommends using an SAE 10W-30 weight oil with an American Petroleum Institute (API) rating of SJ or later.
What type of oil does a Honda small engine take?
10W-30
10W-30 Engine Oil.
Can I use 5w30 instead of 10w30 in my Honda lawn mower?
Running Cold If your mower manual calls for a 5W-30 engine oil, using a 10W-30 oil is also acceptable. The only difference between the two oils is the low temperature point, with the 5W-30 functioning slightly better than the 10W-30.
Can you use synthetic oil in small Honda engines?
Can I use synthetic oil in my Honda engine? Honda engines are developed, tested and certified with petroleum based motor oils as a lubricant. Synthetic oils may be used; however, any motor oil used in our engines must meet all oil requirements as stated in the owner’s manual.
Is full synthetic oil good for small engines?
In conclusion, yes, you can use a synthetic oil in your mower engine. Look in the owner’s manual and buy the synthetic version of the oil the manufacture recommends. You will not have to change the oil as often and the oil will take better care of your engine.
What kind of oil goes in a Honda GX200?