What is an AP 1 target?

The AP-1(P) target is the Official NRA Bianchi Cup target, and is a modified D-1(T) with a bullseye 4″ in diameter, & printed black in color. The AP-1(P) target is used in NRA Action Pistol shooting competitions. The AP-1 (P) target is 23″ X 35″ in size and printed on lightweight paper.

What is a B8 target?

The B8 target sizing is important to understand in order to draw a good correlation. The B8 target gets its name from being 8″ in diameter. The 9 ring is 5.54″, 10 ring is 3.36″ and the X ring is 1.695″ in diameter. How you print your B8 is important as the sizing could change if done incorrectly.

How big is an IPSC target?

30″ L x 18.25″
Size Dimensions: Full size IPSC: (30″ L x 18.25″ W x 0.4″ D) 48 lbs.

What is a bill drill?

Bill drills are a multipurpose drill. There is a lot you can get out of it. The procedure for the bill drill is to draw, and fire 6 rounds into the target. At closer ranges, you should strive for all “A” zone hits. At longer ranges, the occasional close “C” is no big deal.

What size is an A zone target?

6″ x 11″
Target is 6″ x 11″. It is the size of the A zone on USPSA and IPSC targets.

What size is a zone?

6in x 12″
When you practice your precision with an A Zone your shooting improves with every ding. System includes an A Zone Strike Face, measuring 6in x 12″ made of 3/8’s AR500 Rifle Rated Steel.

What is the El Presidente drill?

One combat pistol drill is the El Presidente drill, developed by Jeff Cooper in the 1970s and published in the January/February 1979 issue of American Handgunner magazine. This is used as a benchmark to gauge a shooter’s skills, as it tests the draw and reload, and requires good transitions and follow-through.

What is the Blake drill?

The “Blake” drill is a drill that takes its name from Blake Miguez. This isn’t because he invented the drill, it is because the drill was invented so people could emulate his shooting. Blake is known for extremely fast target transitions and fast hosing.

How big is a zone target?

Target is 6″ x 11″. It is the size of the A zone on USPSA and IPSC targets.

What is a good El Prez time?

10 seconds
The par time is 10 seconds which is considered good while pros can routinely get into the 4-5 second mark. And from Cooper himself, he believed a well executed El Presidente should sound like 6 evenly spaced shots followed by a lull for reloading, and then 6 evenly spaced shots again.

What is the bill drill?

How big is the C zone target?

The C Zone shaped plate is approximately 12″Wx24″H. This size is widely accepted in the competitive, training, and law enforcement world and is used for qualifications all over the globe. The C Zone A-DAP is our loudest ringing target and can be easily heard when struck, even over 1000 yards away.

What is El Presidente drill?

The El Presidente drill is set up as follows: Three silhouette targets are placed 1 meter apart in a line 10 meters from the shooter. The shooter starts with six rounds in a holstered handgun, and a spare magazine or speedloader with another six rounds.

Whats a good time for the bill drill?

1.7 seconds is a reasonable goal time for this. That may sound fast (and it is), but remember that you will hardly need to aim and will be able to shed lead as fast as you can pull the trigger.

What is C zone target?

The C Zone A-DAP target was designed specifically to be our most durable, loudest ringing steel target in our lineup. The C Zone shaped plate is approximately 12″Wx24″H. This size is widely accepted in the competitive, training, and law enforcement world and is used for qualifications all over the globe.

What is a zone target?

The A Zone Target system a perfect replica of the regulation size ISPC A Zone. When you practice your precision with an A Zone your shooting improves with every ding. System includes an A Zone Strike Face, measuring 6in x 12″ made of 3/8’s AR500 Rifle Rated Steel.

What is combat pistol drill?

Pistol Shooting Drills for Combat Marksmanship

• Phase 5 Drill. The Phase 5 Drill is all about muscle memory.
• Baer Standard Drill. The Baer Standard drill was designed and named after a special forces operator and the owner of Baer Solutions.
• William Drill.
• Dot Torture.
• El Guapo Drill.
• Failure To Stop Drill.